跳至主要内容

Experiment for potassium diformate

Select respectively 20 pigs of 15 kg and 35 kg, which are well developed, and good nutritional status and approximate, to experiment with feeding 30days, different weight of the pigs are divided into four groups, each group 5 pigs, the first and the second group are fed with adding 0.4 and 0.6 potassium diformate respectively, the third group is fed with adding antibiotics, the fourth group is fed with no antibiotics and potassium diformate, after 30 days, the experiment result is as following:

Index
The first group
The second group
The third group
The fourth group
Number of diarrhea
3
2
4
6
Days of diarrhea
9
8
11
13
Ratio of diarrhea
9.0%
5.3%
14.6%
26%
Remarks: Ratio of diarrhea=Number of diarrhea/total pigs*experiment days)*100%

The growth performance of pigs with potassium diformate
Items
Piglet
Growing pigs
Fattening pigs
The whole growth  process
Average Daily Gainkg/d)
0.55
0.83
0.91
0.74
Average Daily Feed Intakekg/d)
1.32
2.15
3.03
2.21
Feed Conversion Ratekg/d
2.42
2.65
3.52
3.01

Recommended usage
Stage
Volume of Addition%
anthony pig
7kg-8kg
0.9-1.3
8kg-15kg
0.6-1.0
piglet15kg-30kg)
0.6-0.9
Growing pigs30kg-60kg)
0.3-0.6
sow
pregnant sow
0.3-0.5
lactating sows
0.5-0.8
breeding boar
0.3-0.5
Laying hen
0.2-0.5
Broiler
0.2-0.5
aquaculture
0.3-0.6
mildewproof
0.1-0.5

评论

此博客中的热门博文

What is silicon carbide whiskers and its application

Silicon carbide whiskers are a kind of single-crystal fiber with a certain length-to-diameter ratio, which has very good high temperature resistance and high strength. It is mainly used in toughening applications where high temperature and high strength applications are required. Such as: aerospace materials, high-speed cutting tools. At present, it has a very high performance-price ratio. Silicon carbide whiskers are cubic whiskers, and diamonds belong to a crystal form. They are the whiskers with the highest hardness, the largest modulus, the highest tensile strength and the highest heat resistance temperature. It is both α-type and β-type, in which β-type performance is better than α-type and has higher hardness (Mohs hardness of 9.5 or more), better toughness and electrical conductivity, anti-wear, high temperature resistance, especially earthquake resistance Corrosion-resistant, radiation-resistant, has been applied to aircraft, missile casings and engines, high-temperature turbi...

Acetamiprid is one of the safety Insecticide for agriculture

Insecticide acetamiprid  is an organic compound with the chemical formula C10H11ClN4. It is an odorless neonicotinoid insecticide produced under the trade names Assail, and Chipco by Aventis CropSciences. It is systemic and intended to control sucking insects (Lepidoptera, Thysanoptera, Hemiptera, mainly aphids) on crops such as leafy vegetables, citrus fruits, pome fruits, grapes, cotton, cole crops, and ornamental plants. It is also a key pesticide in commercial cherry farming due to its effectiveness against the larvae of the cherry fruit fly. Insecticide acetamiprid  is an insecticide belonging to the chloropyridinyl neonicotinoids, this family of insecticides was introduced in the early 1990s. This compound is an insecticide that is introduced for controlling pests, but also for domestic use to control fleas on cats and dogs. Mechanism of action: Insecticide acetamiprid  is a nicotine-like substance and reacts to the body in a similar way as nicotine. Nicotine is a n...

What is boron nitride coating and how to use it?

Product Characteristics Environment Friendly: Boron nitride is environmentally friendly, non-toxic, non-polluting Chemical Properties:  Strong non-stick properties in high temperature environment, stability in high temperature Physical Properties: Electrical insulator, low dielectric constant, good thermal conductivity and high lubricity Product Features: Special formula, water-based, easy to use, long-acting formula This type of coating is suitable for all kinds of release agents which need to be operated at high temperature (the product can withstand high temperature of 2800 C). For example, glass industry, metal welding industry, etc., can effectively lubricate and isolate the interface, which can make the processing more smoothly. Sintering of metal and ceramic powders is usually carried out on graphite plate. After coated with boron nitride coating on graphite, the pollution, reaction and bonding phenomena of carbon on sintered parts which may ...