跳至主要内容

Mycoplasma Pneumoniae IgM Test Kit(Colloidal Gold)

 The Diagnostic Automation Mycoplasma Pneumonia IgM kit is intended for the qualitative determination of IgM antibodies in human serum to Mycoplasma pneumonia antigen. 

The DAI anti- Mycoplasma IgM assay may be used as an aid in the diagnosis of Mycoplasma pneumoniae infection in the adult population.



Materials Provided with Mycoplasma Pneumonia IgM Test  Kit:

1. Microassay plate:wells coated with inactivated M. pneumonia (strain FH). antigen

2. HRP Conjugate: Ready to use, Goat anti-human IgM

3. Positive Control: Human serum

4. Calibrator: Human serum

5. Negative Control: Human serum

6. Serum Diluent Type I, Ready to use

7. TMB, Ready to use

8. Stop Solution: Ready to use,1N H2SO4 solution

9. Wash Buffer 10X


Materials required but not provided:

1. Freshly distilled or deionized water

2. Dispensing system and/or pipette

3. kit Microplate washer

4.  kit Microplate Reader with 450 single & 600-650nm dual wavelength


Mycoplasma Pneumonia IgM Test Kit Background Information:

Mycoplasma pneumoniae is among the smallest of free-living organisms. In humans, it is usually found in the throat and lungs and is susceptible to antimicrobial agents that inhibit protein synthesis. The spread of mycoplasmal infections depends on close and prolonged contact between people, as it is transmitted by means of droplet nuclei from the respiratory tract. Mycoplasmal infection may be asymptomatic or may produce upper respiratory tract disease or atypical pneumonia. The pneumonia is difficult to differentiate from viral diseases by clinical means alone Laboratory tests such as isolation, Complement Fixation serology, and ELISA serology are helpful as an aid in the diagnosis.


Mycoplasma Pneumonia IgM Test Principle:

When antigens bound to the solid phase are brought into contact with a patient serum, antigen specific antibody, if present, will bind to the antigen on the solid phase forming antigen- antibody complexes. Excess antibody is removed by washing. This is by the addition of goat anti-human IgM globulin conjugated with horseradish peroxidase which then binds to the antibody-antigen complexes. The excess conjugate is removed by washing, by the addition of substrate and chromogen. If specific antibody to the antigen is present in the serum, a blue color develops which is proportional to the concentration of antibody in the serum.

For more information about  Kits, Rapid Tests, IFA Kits, CLIA Test Kits, or Serology tests, please see our website home page, or contact our Customer Service Representative at 818-591-3030.


Product Note:

Each time DAI Mycoplasma pneumonia IgM assay is run, the Calibrator must be run in triplicate. A reagent blank, Negative Control, and Positive Control must also be included in each assay. Calculate the mean of the three Calibrator wells. If any of the three values differ by more than 15 percent from the mean, discard that value and calculate the mean using the remaining two wells. The mean OD value for the Calibrator and the OD values for the Positive and Negative Controls should fall within the expected ranges.

评论

此博客中的热门博文

What is silicon carbide whiskers and its application

Silicon carbide whiskers are a kind of single-crystal fiber with a certain length-to-diameter ratio, which has very good high temperature resistance and high strength. It is mainly used in toughening applications where high temperature and high strength applications are required. Such as: aerospace materials, high-speed cutting tools. At present, it has a very high performance-price ratio. Silicon carbide whiskers are cubic whiskers, and diamonds belong to a crystal form. They are the whiskers with the highest hardness, the largest modulus, the highest tensile strength and the highest heat resistance temperature. It is both α-type and β-type, in which β-type performance is better than α-type and has higher hardness (Mohs hardness of 9.5 or more), better toughness and electrical conductivity, anti-wear, high temperature resistance, especially earthquake resistance Corrosion-resistant, radiation-resistant, has been applied to aircraft, missile casings and engines, high-temperature turbi...

What is boron nitride coating and how to use it?

Product Characteristics Environment Friendly: Boron nitride is environmentally friendly, non-toxic, non-polluting Chemical Properties:  Strong non-stick properties in high temperature environment, stability in high temperature Physical Properties: Electrical insulator, low dielectric constant, good thermal conductivity and high lubricity Product Features: Special formula, water-based, easy to use, long-acting formula This type of coating is suitable for all kinds of release agents which need to be operated at high temperature (the product can withstand high temperature of 2800 C). For example, glass industry, metal welding industry, etc., can effectively lubricate and isolate the interface, which can make the processing more smoothly. Sintering of metal and ceramic powders is usually carried out on graphite plate. After coated with boron nitride coating on graphite, the pollution, reaction and bonding phenomena of carbon on sintered parts which may ...

We have already used titanium dioxide powder in our lives.

Titanium is a chemical element, chemical symbol Ti, atomic number 22, located in the fourth cycle of the chemical periodic table, group IVB. It is a silver-white transition metal characterized by light weight, high strength, metallic luster and resistance to wet chlorine gas. The most common compound of titanium is titanium dioxide, which can be used to make white pigments. In the past, people used to mine titanium ore, the main purpose is to obtain titanium dioxide. 1.The nature of titanium dioxide Titanium dioxide (chemical formula: TiO2) is a white or bulk amphoteric oxide with a molecular weight of 79.83. Titanium dioxide is a compound of titanium, a pure substance composed of two or more elements (different from elemental matter). A compound has certain properties, different from the elements or ions it contains, and other compounds. Properties of crystal form: TiO2 has three main crystal forms such as rutile type, anatase type and plate titanium type. Optical properties: Since T...