跳至主要内容

MKP Application

Monopotassium phosphate, MKP, (also potassium dihydrogenphosphate, KDP, or monobasic potassium phosphate), KH2PO4, is a soluble salt of potassium and the dihydrogen phosphate ion which is used as a fertilizer, a food additive and a fungicide. It is a source of phosphorus and potassium. It is also a buffering agent. When used in fertilizer mixtures with urea and ammonium phosphates, it minimizes escape of ammonia by keeping the acidity at a relatively low level.

Single crystals are paraelectric at room temperature. At temperatures below −150 °C (−238 °F) they become ferroelectric.

Fertilizer-grade MKP powder contains the equivalent of 52% P2O5 and 34% K2O, and is labeled NPK 0-52-34. MKP powder is often used as a nutrient source in the greenhouse trade and in hydroponics.

As a crystal, MKP is noted for its non-linear optical properties. Used in optical modulators and for non-linear optics such as second-harmonic generation (SHG).

Also to be noted is KD*P, potassium dideuterium phosphate, with slightly different properties. Highly deuterated KDP is used in nonlinear frequency conversion of laser light instead of protonated (regular) KDP due to the fact that the replacement of protons with deuterons in the crystal shifts the third overtone of the strong OH molecular stretch to longer wavelengths, moving it mostly out of the range of the fundamental line at ~1064 nm of neodymium-based lasers. Regular KDP has absorbances at this wavelength of approximately 4.7–6.3%/cm of thickness while highly deuterated KDP has absorbances of typically less than 0.8%/cm.

from:Anhui Sinotech Industrial Co.,Ltd(http://www.techemi.com)

评论

此博客中的热门博文

Acetamiprid is one of the safety Insecticide for agriculture

Insecticide acetamiprid  is an organic compound with the chemical formula C10H11ClN4. It is an odorless neonicotinoid insecticide produced under the trade names Assail, and Chipco by Aventis CropSciences. It is systemic and intended to control sucking insects (Lepidoptera, Thysanoptera, Hemiptera, mainly aphids) on crops such as leafy vegetables, citrus fruits, pome fruits, grapes, cotton, cole crops, and ornamental plants. It is also a key pesticide in commercial cherry farming due to its effectiveness against the larvae of the cherry fruit fly. Insecticide acetamiprid  is an insecticide belonging to the chloropyridinyl neonicotinoids, this family of insecticides was introduced in the early 1990s. This compound is an insecticide that is introduced for controlling pests, but also for domestic use to control fleas on cats and dogs. Mechanism of action: Insecticide acetamiprid  is a nicotine-like substance and reacts to the body in a similar way as nicotine. Nicotine is a n...

What is silicon carbide whiskers and its application

Silicon carbide whiskers are a kind of single-crystal fiber with a certain length-to-diameter ratio, which has very good high temperature resistance and high strength. It is mainly used in toughening applications where high temperature and high strength applications are required. Such as: aerospace materials, high-speed cutting tools. At present, it has a very high performance-price ratio. Silicon carbide whiskers are cubic whiskers, and diamonds belong to a crystal form. They are the whiskers with the highest hardness, the largest modulus, the highest tensile strength and the highest heat resistance temperature. It is both α-type and β-type, in which β-type performance is better than α-type and has higher hardness (Mohs hardness of 9.5 or more), better toughness and electrical conductivity, anti-wear, high temperature resistance, especially earthquake resistance Corrosion-resistant, radiation-resistant, has been applied to aircraft, missile casings and engines, high-temperature turbi...

Influence of Crucible to Experimental Results in Differential Scanning Calculation

Differential scanning calculation (DSC) is a technique that under temperature control program, used to determine the relationship between the heat flow rate or power difference of samples and reference materials, and temperature or time under program control temperature. DSC has been widely used in the fields of material processing, chemistry, medicine, biochemistry, petroleum, aerospace, environmental protection, etc. Thermal analysis is an important method used in physical property analysis in raw material analysis to analyze the mineral composition and chemical composition of raw materials. DSC is a calorimetric analysis method. Its measurement results are affected not only by material state, but also by factors such as experimental conditions. This paper studies the main factors affecting DSC measurement results and puts forward suggestions that should be considered in DSC measurement. 1.Experiment Sample: copper alloy, fer roalloy, hydroxyapatite powder, ...